A lifting attachment can look fine on the ground and still fail an inspection when its capacity, condition, or documentation cannot be verified. That is where schedules get held up. Knowing how to certify lifting attachments means treating the attachment, its test...
A crew can be ready, equipment can be on site, and a lift can still be stopped by one missing document or unresolved issue. The top causes of inspection delays are usually not complicated, but they are costly when discovered after the inspector arrives. For...
A lift can be tested correctly and still hold up a job if the paperwork is incomplete, missing, or does not match the equipment in front of the inspector. Jobsite load testing documentation is the proof that turns a completed test into an approved, usable lifting...
A failed inspection rarely comes down to one missing piece of paper. More often, the equipment was tested in the wrong setting, the documentation does not match the installed configuration, or the test was scheduled too late. Understanding field certification vs shop...
A crane is scheduled, the crew is mobilized, and an inspector asks for current documentation on the lifting gear. That is when the question becomes urgent: who needs lifting certification? In most cases, it is not just the person operating the equipment. The...
A pad eye can look sound and still fail under load if the plate, weld, attachment point, or load path has been compromised. Knowing how to test pad eyes means more than attaching a load and pulling. The test has to match the pad eye’s intended service, the structure...
